Nga otinga EMS mo te Poari Takiwa Taa
Whakaahuatanga
Ko te taputapu SPI, AOI, me te X-ray mo nga raina 20 SMT, 8 DIP, me nga rarangi whakamatautau, ka tukuna e matou he ratonga matatau kei roto i te tini o nga tikanga huihuinga me te whakaputa i te PCBA maha-papanga, PCBA ngawari.Ko ta maatau taiwhanga ngaio he ROHS, maturuturu, ESD, me nga taputapu whakamatautau teitei me te iti.Ko nga hua katoa ka tukuna e te mana o te kounga.Ma te whakamahi i te punaha MES matatau mo te whakahaere whakangao i raro i te paerewa IAF 16949, ka whakahaere tika matou i te whakaputanga.
Ma te whakakotahi i nga rauemi me nga miihini, ka taea ano e matou te tuku i nga otinga hotaka, mai i te whakawhanaketanga hotaka IC me te rorohiko ki te hoahoa ara iahiko.Ma te wheako ki te whakawhanake kaupapa i roto i te hauora me te hikohiko kaihoko, ka taea e matou te tango i o whakaaro me te kawe i te hua tuuturu ki te ora.Ma te whakawhanake i te rorohiko, te hotaka, me te poari ano, ka taea e tatou te whakahaere i te katoa o nga mahi hanga mo te poari, me nga hua whakamutunga.He mihi ki ta maatau wheketere PCB me nga miihini, ka whakawhiwhia mai ki a maatau nga painga whakataetae ka whakaritea ki te wheketere noa.I runga i te hoahoa hua me te roopu whanaketanga, te tikanga whakangao o nga rahinga rereke, me te whakawhitiwhiti korero whai hua i waenga i te mekameka tuku, ka maia taatau ki te pa atu ki nga wero ka oti te mahi.
| Te kaha PCBA | |
| Nga taputapu aunoa | Whakaahuatanga |
| Taiaho tohu miihini PCB500 | Te tohu tohu: 400 * 400mm |
| Tere: ≤7000mm/S | |
| Te mana teitei: 120W | |
| Q-whakawhiti, Tauwehenga Mahi: 0-25KHZ;0-60% | |
| Mīhini tā DSP-1008 | Rahi PCB: MAX:400*34mm MIN:50*50mm T:0.2~6.0mm |
| Rahi Stencil: MAX:737*737mm MIN:420*520mm | |
| Te pehanga kirikiri: 0.5~10Kgf/cm2 | |
| Tikanga horoi: horoi maroke, horoi maku, horoi korehau (ka taea te whakarite) | |
| Te tere tā: 6~200mm/sec | |
| Te tika o te tuhi: ±0.025mm | |
| SPI | Tikanga ine: 3D Maama Maama PSLM PMP |
| Tuemi ine: Rarahi whakapiri Solder, horahanga, teitei, XY offset, hanga | |
| Taumira arotahi: 18um | |
| Tika: XY taumira: 1um; Te tere teitei: 0.37um | |
| Te rahi tirohanga: 40*40mm | |
| tere FOV: 0.45s/FOV | |
| Mīhini SMT tere teitei SM471 | Rahi PCB: MAX:460*250mm MIN:50*40mm T:0.38~4.2mm |
| Te maha o nga rakau whakapuru: 10 nga miro x 2 ngongo | |
| Rahi Waahanga: Tipi 0402(01005 īnihi) ~ □14mm(H12mm) IC, Hononga(wai mata 0.4mm),※BGA,CSP(0.4mm mokowā pōro tine) | |
| Te tika o te whakairinga: maramara ±50um@3ó/ maramara, QFP ±30um@3ó/ maramara | |
| Te tere tere: 75000 CPH | |
| Mīhini SMT tere teitei SM482 | Rahi PCB: MAX:460*400mm MIN:50*40mm T:0.38~4.2mm |
| Te maha o nga rakau whakapuru: 10 nga miro x 1 te poupou | |
| Rahi Waahanga: 0402(01005 īnihi) ~ □16mm IC, Hononga(tararahi 0.4mm),※BGA,CSP(Tina mokowā pōro 0.4mm) | |
| Whakaeke tika: ±50μm@μ+3σ (e ai ki te rahi o te maramara paerewa) | |
| Te tere tere: 28000 CPH | |
| HELLER MARK III Te oumu hauota | Rohe: 9 rohe whakamahana, 2 rohe whakamahana |
| Pūtake wera: Te wera o te hau wera | |
| Te mana o te pāmahana: ± 1 ℃ | |
| Te kaha utu wera: ±2℃ | |
| Tere orbital: 180—1800mm/min | |
| Awhe whanui ara: 50—460mm | |
| AOI ALD-7727D | Tikanga ine: Ka whiwhi te kaamera HD te ahua whakaata o ia wahanga o te rama e toru-tae e mura ana i runga i te papa PCB, ka whakatauhia ma te whakataurite i te ahua me te mahi arorau o nga uara hina me te RGB o ia tohu pika. |
| Tuemi ine: Ko nga koha ta te whakapiri konuhono, he koha nga waahanga, he koha hono hono | |
| Taumira arotahi: 10um | |
| Tika: XY taumira: ≤8um | |
| 3D X-RAY AX8200MAX | Rahi kitenga teitei: 235mm * 385mm |
| Te mana teitei: 8W | |
| Ngaohiko teitei: 90KV/100KV | |
| Rahi arotahi: 5μm | |
| Haumaru (inenga irirangi): ＜1uSv/h | |
| Ngaru whakapiringa DS-250 | PCB whanui: 50-250mm |
| PCB teitei tuku: 750 ± 20 mm | |
| Te tere tuku: 0-2000mm | |
| Te roa o te rohe whakamahana: 0.8M | |
| Te maha o te rohe whakamahana: 2 | |
| Tau ngaru: Ngaru rua | |
| Miihini wehewehe poari | Awhe mahi: MAX: 285 * 340mm MIN: 50 * 50mm |
| Te tapahi tika: ± 0.10mm | |
| Te tere tapahi: 0~100mm/S | |
| Te tere o te hurihanga o te miro: MAX: 40000rpm | |
| Te Hangarau Hangarau | ||
| Tau | Tūemi | Te kaha nui |
| 1 | rauemi turanga | Normal Tg FR4, High Tg FR4, PTFE, Rogers, Low Dk/Df etc. |
| 2 | Tae kanohi konohono | matomato, whero, puru, ma, kowhai, papura，pango |
| 3 | Tae korero | ma, kowhai, pango, whero |
| 4 | Momo maimoatanga mata | ENIG, tine Rūmaki, HAF, HAF LF, OSP, koura uira, maihao koura, hiriwa tino pai |
| 5 | Max.paparanga(L) | 50 |
| 6 | Max.rahinga wae (mm) | 620*813 (24"*32") |
| 7 | Max.te rahi o te papa mahi (mm) | 620*900 (24"x35.4") |
| 8 | Max.matotoru papa (mm) | 12 |
| 9 | Min.matotoru papa(mm) | 0.3 |
| 10 | Whakaaetanga matotoru papa (mm) | T<1.0 mm: +/-0.10mm ;T≥1.00mm: +/-10% |
| 11 | Whakaaetanga rehitatanga (mm) | +/-0.10 |
| 12 | Min.diameter poka keri miihini (mm) | 0.15 |
| 13 | Min.taiaho poka keri diameter(mm) | 0.075 |
| 14 | Max.ahua（ma roto i te poka) | 15:1 |
| Max.āhuatanga(micro-via) | 1.3:1 | |
| 15 | Min.tapa poka ki te mokowā parahi(mm) | L≤10, 0.15；L=12-22,0.175；L=24-34, 0.2；L=36-44, 0.25；L＞44, 0.3 |
| 16 | Min.whakawātea i roto (mm) | 0.15 |
| 17 | Min.kohao pito ki te kohao mokowhiti taha (mm) | 0.28 |
| 18 | Min.tapa poka ki te mokowā raina kōtaha(mm) | 0.2 |
| 19 | Min.te parahi i roto ki te raina kōtaha sapce (mm) | 0.2 |
| 20 | Rēhitatanga i waenga i nga rua (mm) | ±0.05 |
| 21 | Max.matotoru parahi kua oti(um) | Apa Waho: 420 (12oz) Apa Roto: 210 (6oz) |
| 22 | Min.te whanui tohu (mm) | 0.075 (3mil) |
| 23 | Min.tohu mokowā (mm) | 0.075 (3mil) |
| 24 | Mātotoru kanohi konohono (um) | kokonga raina : >8 (0.3mil) i runga i te parahi: >10 (0.4mil) |
| 25 | ENIG matotoru koura (um) | 0.025-0.125 |
| 26 | ENIG matotoru nickle (um) | 3-9 |
| 27 | Te matotoru o te hiriwa (um) | 0.15-0.75 |
| 28 | Min.HAL tine matotoru (um) | 0.75 |
| 29 | Te matotoru tine rumaki (um) | 0.8-1.2 |
| 30 | Whakakikoruatia koura matotoru te matotoru koura (um) | 1.27-2.0 |
| 31 | maihao koura whakakikorua koura matotoru (um) | 0.025-1.51 |
| 32 | maihao koura whakakikorua nickle matotoru(um) | 3-15 |
| 33 | whakakikorua koura whakakikorua koura matotoru (um) | 0,025-0.05 |
| 34 | uira koura whakakikorua nickle matotoru (um) | 3-15 |
| 35 | te rahi o te tohu tohu (mm) | ±0.08 |
| 36 | Max.kanohi konuhia te rahi o te poka (mm) | 0.7 |
| 37 | Papa BGA (mm) | ≥0.25 (HAL, HAL Kore ranei:0.35) |
| 38 | V-CUT te tuunga o te mata mata (mm) | +/-0.10 |
| 39 | V-CUT tūnga kātakí (mm) | +/-0.10 |
| 40 | Koikoi maihao maihao bevel kātakí (o) | +/-5 |
| 41 | Whakaaetanga aukati (%) | +/-5% |
| 42 | Whakaaetanga raupatu (%) | 0.75% |
| 43 | Min.whanui pakiwaitara (mm) | 0.1 |
| 44 | Te mura o te ahi | 94V-0 |
| Motuhake mo Via i nga hua papa | Te rahi o te kohao mono (meneti) (mm) | 0.3 |
| Te rahi o te kohao mono (mōrahi) (mm) | 0.75 | |
| Te matotoru o te papa puru puru (min.) (mm) | 0.5 | |
| Te matotoru o te papa puru puru (mōrahi) (mm) | 3.5 | |
| Ko te resin mono te ōwehenga mōrahi āhuatanga | 8:1 | |
| Ko te Resin i honoa te kohao iti ki te mokowā kohao (mm) | 0.4 | |
| Ka taea te rereke te rahi o te kohao i te papa kotahi? | āe | |
| Papa rererangi ki muri | Tūemi | |
| Max.rahi pnl (kua oti) (mm) | 580*880 | |
| Max.te rahi o te papa mahi (mm) | 914 × 620 | |
| Max.matotoru papa (mm) | 12 | |
| Max.paparanga(L) | 60 | |
| Ahuatanga | 30:1 (Min. poka: 0.4 mm) | |
| Raina whanui/mokowā (mm) | 0.075/ 0.075 | |
| Te kaha ki te wiri ki muri | Ae | |
| Whakaaetanga o te wiri whakamuri (mm) | ±0.05 | |
| Te kawa o nga kohao uru pehi (mm) | ±0.05 | |
| Momo maimoatanga mata | OSP, hiriwa, ENIG | |
| Te papa maataki | Rahi poka (mm) | 0.2 |
| Te matotoru Dielectrical (mm) | 0.025 | |
| Rahi Paewhiri Mahi (mm) | 350 x 500 | |
| Raina whanui/mokowā (mm) | 0.075/ 0.075 | |
| Whakakaha | Ae | |
| Nga papa papa takahuri (L) | 8 (4plys of flex board) | |
| Papa papa maro (L) | ≥14 | |
| Te maimoatanga mata | Katoa | |
| Pikitia te papa ki waenga paparanga o waho ranei | E rua | |
| Motuhake mo nga hua HDI | Rahi poka keri taiaho (mm) | 0.075 |
| Max.matotoru dielectric (mm) | 0.15 | |
| Min.matotoru dielectric (mm) | 0.05 | |
| Max.ahua | 1.5:1 | |
| Rahi Papa Raro (i raro i te moroiti-ma) (mm) | Rahi poka+0.15 | |
| Rahi papa taha runga ( kei runga moroiti-ma) (mm) | Rahi poka+0.15 | |
| Te whakakī parahi, kaore ranei (ae, kao ranei) (mm) | āe | |
| Ma te hoahoa Pad kaore ranei (ae, kaore ranei) | āe | |
| Ko te kapia poka kua tanumia (ae, kao ranei) | āe | |
| Min.mā te rahi ka taea te whakakī parahi (mm) | 0.1 | |
| Max.wā tāpae | tetahi paparanga | |