Xalalka EMS ee Guddiga Wareegga Daabacan
Sharaxaada
Ku qalabaysan SPI, AOI, iyo raajada 20 khadadka SMT, 8 DIP, iyo khadadka tijaabada, waxaanu bixinaa adeeg horumarsan oo ay ku jiraan farsamooyin badan oo isku-ururin ah oo soo saara PCBA-da lakabyo badan, PCBA dabacsan.Shaybaadhkayaga xirfadlaha ah wuxuu leeyahay ROHS, dhibic, ESD, iyo aaladaha tijaabinta heerkul hoose & sare.Dhammaan alaabooyinka waxaa lagu gudbiyaa xakamaynta tayada adag.Isticmaalka nidaamka MES ee horumarsan ee maaraynta wax soo saarka ee hoos yimaada heerka IAF 16949, waxaanu u maaraynaa wax soo saarka si hufan oo ammaan ah.
Marka la isku daro kheyraadka iyo injineerada, waxaan sidoo kale bixin karnaa xalalka barnaamijka, laga bilaabo horumarinta barnaamijka IC iyo software ilaa naqshadeynta wareegga korantada.Khibrad u leh horumarinta mashaariicda daryeelka caafimaadka iyo elektiroonigga macaamiisha, waxaan la wareegi karnaa fikradahaaga oo aan keeni karnaa alaabta dhabta ah nolosha.Marka la horumariyo software-ka, barnaamijka, iyo guddiga laftiisa, waxaan maareyn karnaa dhammaan habka wax soo saarka ee guddiga, iyo sidoo kale alaabta ugu dambeysa.Thanks to warshadeena PCB iyo injineerada, waxay na siisaa faa'iidooyin tartan ah marka loo eego warshadda caadiga ah.Iyada oo ku saleysan naqshadeynta badeecada & kooxda horumarinta, habka wax soo saarka ee la aasaasay ee tirooyin kala duwan, iyo isgaarsiin wax ku ool ah oo u dhexeeya silsiladda sahayda, waxaan ku kalsoonahay inaan wajaheyno caqabadaha oo aan helno shaqada.
| Kartida PCBA | |
| Qalabka tooska ah | Sharaxaada |
| Mashiinka calaamadaynta laser PCB500 | Qiyaasta calaamadaynta: 400*400mm |
| Xawaaraha: ≤7000mm/S | |
| Awoodda ugu badan: 120W | |
| Q-beddelka, Saamiga Waajibka: 0-25KHZ;0-60% | |
| Mashiinka daabacaadda DSP-1008 | Cabbirka PCB: MAX:400*34mm MIN:50*50mm T:0.2~6.0mm |
| Cabbirka Stencil: MAX:737*737mm MIN:420*520mm | |
| Cadaadiska xoqida: 0.5 ~ 10Kgf/cm2 | |
| Habka nadiifinta: Nadiifinta qalalan, nadiifinta qoyan, nadiifinta faakuumka (barnaamij la samayn karo) | |
| Xawaaraha daabacaadda: 6 ~ 200mm / sek | |
| Saxnaanta daabacaadda: ± 0.025mm | |
| SPI | Mabda'a cabbiraadda: 3D Iftiin Cad PSLM PMP |
| Shayga cabbirka: Mugga koollada iibka ah, bedka, dhererka, XY-ga ka-baxsan, qaabka | |
| Xallinta muraayadda: 18um | |
| Saxsanaanta: XY xallinta: 1um; Xawaaraha sare: 0.37um | |
| Muuqaalka cabbirka: 40*40mm | |
| Xawaaraha FOV: 0.45s/FOV | |
| Mashiinka xawaaraha sare ee SMT SM471 | Cabbirka PCB: MAX:460*250mm MIN:50*40mm T:0.38~4.2mm |
| Tirada xargaha korka ah: 10 xadhig x 2 cantilevers | |
| Cabbirka qaybta: Chip 0402(01005 inch) ~ □14mm(H12mm) IC, Xidhiidhiyaha(goorka hogaanka 0.4mm), ※BGA,CSP(Tin ball kala dheeraynta 0.4mm) | |
| Saxnaanta fuulista: chip ± 50um@3ó/chip, QFP ± 30um@3ó/chip | |
| Xawaaraha rakibida: 75000 CPH | |
| Xawaaraha sare ee mashiinka SMT SM482 | Cabbirka PCB: MAX:460*400mm MIN:50*40mm T:0.38~4.2mm |
| Tirada xargaha korka: 10 xadhig x 1 cantilever | |
| Cabbirka qaybta: 0402(01005 inch) ~ □16mm IC,Connector(goorka hogaanka 0.4mm),※BGA,CSP(Tin ball fog 0.4mm) | |
| Saxnaanta rakibidda: ± 50μm@μ+3σ (sida ku cad cabbirka jajabka caadiga ah) | |
| Xawaaraha rakibidda: 28000 CPH | |
| HELLER MARK III Foornada soo celinta Nitrojiinka | Aagga: 9 aag kululaynta, 2 aag qaboojinta |
| Isha kulaylka: Convection hawo kulul | |
| Xakamaynta heerkulka saxda ah: ± 1 ℃ | |
| Awoodda magdhowga kulaylka: ± 2℃ | |
| Xawaaraha orbital: 180-1800mm/min | |
| Balaadhka raadraaca: 50-460mm | |
| AOI ALD-7727D | Mabda'a cabbiraadda: Kamaradda HD-gu waxay heshaa xaaladda milicsiga qayb kasta oo ka mid ah iftiinka saddexda midab ee ku iftiiminaya guddiga PCB, waxayna ku xukumaan iyada oo la jaan qaadaysa sawirka ama hawlgalka macquulka ah ee qiyamka cawl iyo RGB ee dhibic kasta |
| Shayga cabbirka: Cilladaha daabacaadda alxanka, cilladaha qaybaha, cilladaha wadajirka ah ee alxanka | |
| Xallinta muraayadda: 10um | |
| Saxsanaanta: XY xallinta: ≤8um | |
| 3D X-RAY AX8200MAX | Cabbirka ogaanshaha ugu badan: 235mm*385mm |
| Awoodda ugu badan: 8W | |
| Korontada ugu badan: 90KV/100KV | |
| Cabbirka diiradda: 5μm | |
| Badbaadada (qiyaasta shucaaca): ＜1uSv/h | |
| Mawjada alxanka DS-250 | PCB ballac: 50-250mm |
| Dhererka gudbinta PCB: 750 ± 20 mm | |
| Xawaaraha gudbinta: 0-2000mm | |
| Dhererka aagga kulaylka ka hor: 0.8M | |
| Tirada aagga kulaylka ka hor: 2 | |
| Nambarka hirarka: Dual mowjad | |
| Mashiinka qaybiyaha guddiga | Qiyaasta shaqada: MAX:285*340mm MIN:50*50mm |
| Saxnimada goynta: ± 0.10mm | |
| Xawaaraha goynta: 0 ~ 100mm/S | |
| Xawaaraha wareegtada dunta: MAX:40000rpm | |
| Kartida Tignoolajiyada | ||
| Tirada | Shayga | Awood weyn |
| 1 | alaabta salka | Tg caadiga ah FR4, High Tg FR4, PTFE, Rogers, Low Dk/Df iwm. |
| 2 | Midabka maaskarada alxanka | cagaar, casaan, buluug, caddaan, jaalle, guduud, madow |
| 3 | Midabka halyeeyga | caddaan, jaalle, madow, casaan |
| 4 | Nooca daaweynta dusha sare | ENIG, daasadda Immersion, HAF, HAF LF, OSP, dahab toosan, far dahab ah, lacag isteerin ah |
| 5 | Max.lakabka (L) | 50 |
| 6 | Max.cabbirka halbeegga (mm) | 620*813 (24"*32") |
| 7 | Max.cabbirka guddiga shaqada (mm) | 620*900 (24"x35.4") |
| 8 | Max.dhumucda looxa (mm) | 12 |
| 9 | Min.dhumucda looxa (mm) | 0.3 |
| 10 | U dulqaadka dhumucda looxa (mm) | T <1.0 mm: +/-0.10mm;T≥1.00mm: +/- 10% |
| 11 | Dulqaadka diiwaangelinta (mm) | +/- 0.10 |
| 12 | Min.dhexroor dalool farsamo (mm) | 0.15 |
| 13 | Min.dhexroor dalool laser (mm) | 0.075 |
| 14 | Max.dhinac (dalool) | 15:1 |
| Max.dhinaca (micro-via) | 1.3:1 | |
| 15 | Min.cidhifka daloolka ilaa booska naxaasta (mm) | L≤10, 0.15;L=12-22,0.175;L=24-34, 0.2;L=36-44, 0.25；L＞44, 0.3 |
| 16 | Min.nadiifinta gudaha (mm) | 0.15 |
| 17 | Min.cidhifka dalool ilaa daloosha bannaanka (mm) | 0.28 |
| 18 | Min.cidhifka daloolka ilaa booska khadka astaanta (mm) | 0.2 |
| 19 | Min.naxaasta gudaha ilaa dheecaanka xariiqda astaanta (mm) | 0.2 |
| 20 | Dulqaadyada diiwaangelinta ee u dhexeeya godadka (mm) | ±0.05 |
| 21 | Max.dhumucdiisuna waxay dhammaatay (um) | Lakabka dibadda: 420 (12oz) Lakabka Gudaha: 210 (6oz) |
| 22 | Min.ballaca raad (mm) | 0.075 (3 milyan) |
| 23 | Min.meel raad (mm) | 0.075 (3 milyan) |
| 24 | Dhumucda maaskarada alxanka (um) | geeska line:> 8 (0.3mil) dusha naxaasta:>10 (0.4mil) |
| 25 | dhumucda dahabiga ah ee ENIG (um) | 0.025-0.125 |
| 26 | dhumucda nickle ENIG (um) | 3-9 |
| 27 | Dhumucda qalinka Sterling (um) | 0.15-0.75 |
| 28 | Min.Dhumucda daasadda HAL (um) | 0.75 |
| 29 | Dhumucda daasadda Immersion (um) | 0.8-1.2 |
| 30 | Dhumucdiisuna waxay dahaadhay dahab adag (um) | 1.27-2.0 |
| 31 | dhumucda dahabka ee farta dahabka ah (um) | 0.025-1.51 |
| 32 | dhumucda nickle ee farta dahabka ah | 3-15 |
| 33 | dhumucda dahabiga ah ee dahaarka ah (um) | 0,025-0.05 |
| 34 | dhumucda nickle dahaarka dahabka ah (um) | 3-15 |
| 35 | dulqaadka cabbirka astaanta (mm) | ±0.08 |
| 36 | Max.maaskarada alxanka ku xidhida cabbirka daloolka (mm) | 0.7 |
| 37 | suufka BGA (mm) | ≥0.25 (HAL ama HAL Bilaash:0.35) |
| 38 | Dulqaadka booska daabka V-CUT (mm) | +/- 0.10 |
| 39 | Dulqaadka booska V-CUT (mm) | +/- 0.10 |
| 40 | Dulqaadka xagasha farta dahabka ah (o) | +/-5 |
| 41 | Dulqaadka (%) | +/- 5% |
| 42 | Dulqaadka bogga dagaalka (%) | 0.75% |
| 43 | Min.ballaca halyeeyga (mm) | 0.1 |
| 44 | Ololkii dabku wuu shidaa | 94V-0 |
| Gaar ahaan Via ee alaabta suufka | Cabbirka daloolka dib loo soo celiyay (min.) (mm) | 0.3 |
| Cabbirka daloolka resin-ka ah (ugu badnaan) (mm) | 0.75 | |
| Dhumucda looxa dib loo soo celiyay (min.) (mm) | 0.5 | |
| Dhumucda looxa dib loo soo celiyay (max.) (mm) | 3.5 | |
| Saamiga dhinaca ugu badan ee resined | 8:1 | |
| Daloolkii ugu yaraa ee dib loo xidhay ilaa meel bannaan (mm) | 0.4 | |
| Ma kala duwanaan kartaa cabbirka daloolka hal loox? | haa | |
| Dhabarka diyaaradda | Shayga | |
| Max.Cabbirka pnl (dhammeeyay) (mm) | 580*880 | |
| Max.cabbirka guddiga shaqada (mm) | 914 × 620 | |
| Max.dhumucda looxa (mm) | 12 | |
| Max.lakabka (L) | 60 | |
| Dhinaca | 30:1 (Dool yar: 0.4 mm) | |
| Xariiq ballaaran/meel (mm) | 0.075/ 0.075 | |
| Awoodda laylinta dhabarka | Haa | |
| Dulqaadka laydhka dhabarka (mm) | ±0.05 | |
| U dulqaadashada godadka ku habboon saxaafadda (mm) | ±0.05 | |
| Nooca daaweynta dusha sare | OSP, sterling silver, ENIG | |
| Loox-flex adag | Cabbirka daloolka (mm) | 0.2 |
| Dhumucda korantada (mm) | 0.025 | |
| Cabbirka guddiga shaqada (mm) | 350 x 500 | |
| Xariiq ballaaran/meel (mm) | 0.075/ 0.075 | |
| Adag | Haa | |
| Lakabyada sabuuradda Flex (L) | 8 (4 qaybood oo ah looxa dabacsan) | |
| Lakabyada looxa adag (L) | ≥14 | |
| Daaweynta dusha sare | Dhammaan | |
| Ulaha dabacsan lakabka dhexe ama dibadda | Labadaba | |
| Gaar ahaan alaabta HDI | Cabbirka daloolka qodista laser-ka (mm) | 0.075 |
| Max.dhumucda korantada (mm) | 0.15 | |
| Min.dhumucda korantada (mm) | 0.05 | |
| Max.dhinac | 1.5:1 | |
| Cabbirka suufka hoose (ka hooseeya micro-via) (mm) | Cabbirka daloolka+0.15 | |
| Cabbirka suufka dhinaca sare (oo ku yaal micro-via) (mm) | Cabbirka daloolka+0.15 | |
| Buuxinta naxaasta ama maya (haa ama maya) (mm) | haa | |
| Iyada oo loo marayo naqshadaynta suufka ama maya (haa ama maya) | haa | |
| Xabagta godka la aasay oo xidhan (haa ama maya) | haa | |
| Min.iyada oo loo marayo cabbirka waxaa lagu buuxin karaa naxaas (mm) | 0.1 | |
| Max.waqtiyada isku-xidhka | lakab kasta | |